Released on September 18, 2023 - This is my very first original car built from scratch. Penguin is based on the Antarctic Snow Cruiser, a vehicle designed from 1937 to 1939, intended to facilitate transport in Antarctica during the United States Antarctic Service Expedition. The Snow Cruiser was constructed in just 11 weeks. An incredibly...

Released on March 6, 2022 - Sunnyboy is an Advanced rated beach buggy based on Stonemason by RV_Pure and RV_Passion. The parameters were done by Skarma. Before getting a standalone car, I released Sunnyboy as a skin for Stonemason already. Since this day I dreamt of a standalone  release - and here it is! Thank you RV_Pure for...

Released on August 30, 2021 - Demon Slayer is a Monster Truck version of Adeon, which I made for the Re-Volt World Summer Contest 2021. The chassis and parameters are based on Mighty's Get Air. The texture is based on one of my Adeon skins named "Badeon". I kept the number plate B4D1, cause I think it fit well for Demon Slayer as...

Released on May 14, 2021 - Junky is a remodel of Allan1's awesome Dump Truck. It was one of my favourite cars since I rediscovered the game in 2017. In 2018 I made an alternate skin for Dump Truck, called "AMA Dump Co.". Now I decided to make a standalone car out of this skin. I (very) slightly adjusted the model. The wheels are...

Released on March 27, 2021 - SchoolVolt II is a remodel of Xarc's SchoolVolt, and Mighty's Phat Trucker. I used the remodel at my School's Out! tracks already and decided to make a stand-alone car out of it right after I released the tracks. However, it took me more than a year to finish the car. The car comes with a custom honk...

Released on September 16, 2020 - Melon Crusher is a Monster Truck based on Baja Bug by Scloink.  My initial idea was, to create a stock-like version of Tamiyas Monster Beetle. I got the idea for the skin after me and my wife ate a watermelon on a hot summer day. :) The Advanced-parameters are done by Skarma. The custom honk is from...

Released on September 16, 2020 - Redneck is a Monster Truck based on Navajo S by Xarc. I wanted to do competitor for Sasquatch, and decided to reuse the body I've already used for BigChief for it. The Redneck-texture was planned as an alternate skin for Sasquatch first, but I liked it that much, that I decided to use it for a standalone...

Released on September 16, 2020 - Dakota Mystery is a Monster Truck based on Badd RC. My initial idea was, to create a stock-like version of Tamiyas Lunch Box, which can competete well with Sasquatch. The skin is loosely based on the famous Mystery Machine from the Scooby-Doo series, and was suggested by RV Pure. The parameters are done...

Released on September 16, 2020 - Sasquatch is a Monster Truck based on BigVolt. My initial idea behind this car was to create a stock-like version of Tamiyas Blackfoot, which was also my first car, released in 2017. The texture base was made by Yukes Von Faust. The Semi-Pro Parameters are done by Skarma. The custom honk is from the...

Released on March 11, 2020 - This is Ghibli, a Clockwork version of Toyeca! The parameters were done by URV. You can use any Toyeca skin on this car. Have fun! :)   Version 1.0b Changes Updated README (Permissions/Copyright) ...

Released on February 13, 2020 - Koya is a remodel of Z3r0l33t's Dukhar. The car has Semi-Pro params. It's pretty slow for a Semi-Pro car, but it's really fun to drive at bumpy and uneven tracks. Koya have a 4-wheel steering! Have fun!   Version 1.1b Changes Updated README (Permissions/Copyright) ...

Released on February 9, 2020 - This is Yager, a remodel of Xarc's and Yukes' Vitesse. I adjusted the parameters a little bit. Yager has a slightly lower top speed, an increased acceleration, and some other small differences compared to Vitesse. The name 'Yager' comes from an German action game released in 2003. Have fun! :)   Version...

Released on February 8, 2020 - Rptr is a repaint/reparam of Mighty's Mambra. The car has adjusted parameters made by Skarma. The topspeed is slightly higher and the acceleration slightly worse than Mambra's. But the main difference is the stability and handling: Rptr is much easier to control. Have fun! :)   Version 1.1b Changes Updated...

Released on February 7, 2020 - Magma is a repaint/reparam of Xarc's and PaintHeart's Afterburner. The car has completly new params. The Semi-Pro car is now glow powered, FWD, and lighter. The top speed is much better than Afterburner's, and the acceleration is not so insane anymore. However, it accelerate still very good for a Semi-Pro...

Released on February 7, 2020 - Fat Agnus is a remodel of Mighty's Crankenwagon. The car has completly new parameters made by Skarma! Bonzcy! Fun fact: Back in 1998, the worm name generator in Worms 2 named one of my worms 'Fat Agnus'. Since this, I used this name for several things now and then. The time has come to name a Re-Volt...

Released on February 5, 2020 - This is Smokie, a remodel of Xarc's DGR 43. I made the roof a little bit flatter.The parameters are equal to DGR 43. Have fun! :)   Version 1.2 Changes Removed alternate livery Updated README (Permissions/Copyright) ...

Released on February 4, 2020 - This is Electric Sheep, a repaint of Xarc's ZS-9. To fit the name, the car has now an electric engine. Parameter adjustments by Saffron. Have fun! :)   Version 1.1 Changes Removed alternate liveries Updated README (Permissions/Copyright) ...

Released on February 4, 2020 - This is Honeybee, a repaint of Xarc's Honey Rush. The body is a little bit lower on the ground, as well the car is a tiny bit wider. The rest of the parameters are equal to Honey Rush. Carfolder: ./cars/honey The download also includes the original Honey Rush livery. Have fun! :)-Kiwi UPDATE March 2nd,...

Released on September 9, 2019 - King Moloko is a truck for the new Super Pro class, based on SuperBoss. The car is a little bit smaller than SuperBoss. Regardless of it's heaviness, the car can competete quite well in it's class with it's high top speed and good acceleration. Parameter adjustments made by Saffron. Have fun! :) RVGL...

Released on September 9, 2019 - Screamer is a RWD-beast for the new Super Pro class. It has an extreme top speed and good acceleration. Parameters made by Skarma. Be carefull, because Screamer tends to oversteer at lower speeds, or if you push it too hard through corners. The car emphasise tap-steering and throttle control, otherwise...

Released on July 13, 2019 - This is Strax, a repaint of Hi-Ban's Fast Traxx. Strax use the original body and parameters of Fast Traxx. I only renamed the car, did a new skin and a new carbox, to avoid copyright issues with the real Tyco brand 'Fast Traxx'. Have fun! :)   Version 1.2b Changes Updated README (Permissions/Copyright) ...

Released on July 13, 2019 - This is R.I.P, a remodel of Allans's Pix-Skull. I released this car for the 2018's Halloween Carnival Event. The parameters are the same than Pix-Skull's. Have fun! :)   Version 1.1b Changes Updated README (Permissions/Copyright) ...

Released on July 13, 2019 - This is Snokhar, a remodel of Z3r0's Dukhar. I released this car for the 2018's Christmas Carnival Event. The parameters are the same than Dukhars. Have fun! :)   Version 1.1b Changes Updated README (Permissions/Copyright) ...

Released on May 5, 2019 - Evac is a tribute to the car with the same name from the '97 racing game Ignition. The model is based on Dr. Creeper, a great remodel of Dr. Grudge made by FZG in 2018. The Amateur rated and glow powered car has a very soft suspension, and issues keeping the grip after landing, so be careful! The acceleration...

Released on January 25, 2019 - Big Chief is based on Xarc's Navajo S. The params are done by Kipy. The model which inspired me to do BigChief, is a Majorette car (No. 236) from the 1980's, which was one of my favourites as a kid, and which I still own. Have fun! :)   Version 1.2b Changes Updated README (Permissions/Copyright) ...

Released on January 1, 2019 - Swampert sent me this car, to work on it. It's a remodel of Sprinter XL, with Pro params. The car has very high acceleration, and is very stable. But it tends to flip-over in corners, so be carefull. :) I added some mudflaps and rally-lights to the Sprinter XL body. The texture-base is made by Swampert,...

Released on December 28, 2018 - This is Artair, a remodel of Sakyu by Xarc. The car has a very soft suspension, and a Pro-class rating. Params by Mighty, adjusted by Saffron. Remodel and texture by me. Have fun!  Version 1.2b Changes Updated README (Permissions/Copyright) ...

Released on December 27, 2018 - Nova is a car for the new Super Pro class. The body mesh was found by MightyCucumber at TurboSquid. Mighty did the base params, I did the paintjobs. Parameter adjustments made by Saffron. Nova comes in 16 different color combinations: Standard, Azure, Baby, Black, Black-White, Blue, Grey, Kiwi, Orange,...

Released on December 3, 2018 - Panther is a mixture of the 1980's cars DeTomaso Pantera and Ferrari 288 GTO, but it does not share the rear-wheel drive from the real-life counterparts. Instead it's a FWD-car, with lack in acceleration, but very high top speed. The model is based on a free 3d model from TurboSquid, made by perrymeichon. Have...

Released on November 27, 2018 - When BossVolt is a ship, then SuperBoss is a battleship! Ultra heavy, extreme top speed, bad acceleration. Comes with an alternative livery called 'Bandag Bandit'. The model which inspired me to do SuperBoss, is a Matchbox car from 1982. Have fun!   Version 1.2b Changes Updated README (Permissions/Copyright) ...

Released on November 19, 2018 - This is Bumblebee, a remodel of Hi-Ban's Scorcher 6x6. It's the first colab between Mighty Cucumber and me. I did the remodel and textures, Mighty made the parameters. Thanks to IronBob, for sending me the stripes for Bumblebee's top. There are 3 alternate liveries included in the download (Red, Yellow...

Released on August 26, 2018 - For everyone who thinks Sizzler is not enough Offroad for a R6 Turbo remodel. :) Fun fact: Like R6 Turbo, R6 Extreme will be also powered with a glow engine. However, both cars have a clearly visible electric engine at the back... :P Have fun with my new car!   Version 1.1b Changes Updated README (Permissions/Copyright) ...

Released on July 3, 2018 - Based on the 1980's Monstertruck by Tamiya.But it's not an exact replica (4WD instead of RWD, for example). Comes with 3 different liveries: Original, Purple Kiwi and Black Edition. + Very soft suspension, which make it fun to drive.+ Hard to survive in Simulation mode, because of the open wheels.+ Better...

Released on March 15, 2018 - Pemto is a car that can be found on Joe Groombridge's website. Joe Groombridge was one of the artists that made the original Re-Volt stock cars, but Pemto got never released. The picture on his homepage is the only picture available from this car. StrixMidnight did a great first custom version of Pemto....

Released on November 8, 2017 - While driving some laps with Pest Control, I had this idea to do a pest exterminator company van. It's in the same class then Pest Control, but I'm sure you will like the handling more! :) For the body I took Badd RC as a basis, and did some small adjustments. The art design is from original Pest Control....

Released on October 16, 2017 - I've just realized, that I've never released this car officially. So, finally here it is! Bricky F1 Turbo - made in October 2017 - was my third car. I made it for the All's Fair III tournament. As you can see it's a LEGO model. It's a replica of the LEGO model 6503, but with different colours. I own...

Released on October 5, 2017 - After the Blackfoot, this is the second car I've made for Re-Volt. It's the Tamiya Monster Beetle, which was originally released in 1986. In 2016, the Mall Crawler was re-released, but some details was changed (for example the BFGoodrich-brand). I've decided to do a remake of the Original '86-version. As...

Released on September 12, 2017 - This is the first car I've ever made for Re-Volt. It's a Tamiya Blackfoot, which was originally released in 1986. In 2016, the Monster Truck was re-released, but some details was changed (Especially the Ford brand, and some other details). I've decided to do the 86-version, so you can find Ford-logos...