Released on September 15, 2020 - This car is part of the Abandoned Designs Project. On the 09/10/2018, a small group of users decided to set up a dedicated Discord channel to recreate some original designs from the game, using concept sketches, development files, and other original resources as a base. As the project slowly grew, more...

Released on September 15, 2020 - This car is part of the Abandoned Designs Project. On the 09/10/2018, a small group of users decided to set up a dedicated Discord channel to recreate some original designs from the game, using concept sketches, development files, and other original resources as a base. As the project slowly grew, more...

Released on September 15, 2020 - This car is part of the Abandoned Designs Project. On the 09/10/2018, a small group of users decided to set up a dedicated Discord channel to recreate some original designs from the game, using concept sketches, development files, and other original resources as a base. As the project slowly grew, more...

Released on April 12, 2020 - (No description provided.) ...

Released on April 4, 2020 - (No description provided.) ...

Released on April 4, 2020 - (No description provided.) ...

Released on April 4, 2020 - (No description provided.) ...

Released on December 19, 2018 - 2 Hot Rods have become one. AWD and 4 wheel steering. Carbox by Xarc ...

Released on December 19, 2018 - Based of mostly of the Mazda RX500 concept car. also based of other 70's concept cars. Model and Textures by me Params by Skarma Carbox by Xarc ...

Released on October 18, 2018 - A futuristic-like bus, third of 4, also the second fastest. This time we have the 'GT' version, basically a really large racing bus. Model and textures by me Params by Skarma and me Carbox by Xarc ...

Released on October 18, 2018 - This is a Volken Turbo remodel but I guess you could say... a de-modified Volken to make it look like a normal sedan. I might do more of these in the future. It comes in 10 colours. Remodel and Textures by me Params by Skarma Carbox by Xarc ...

Released on October 18, 2018 - A futuristic-like bus, last of 4, also the fastest. This one was slightly inspired by the game crazy taxi. Model and textures by me Params by Skarma and me Carbox by Xarc ...

Released on October 18, 2018 - Literally a missile on wheels, expect it to drive like such. Very quirky params, very high top speed, but also very bad steering. STF stands for Start to Finish. Model, textures and params by me Carbox by Xarc ...

Released on October 18, 2018 - A futuristic-like bus, first of 4, also the slowest. Not much else to say, but enjoy. Model and textures by me Params by Skarma Carbox by Xarc ...

Released on October 18, 2018 - A futuristic-like bus, second of 4, also the second slowest. This time around it's emergency vehicles, comes with 3 liveries. Model and textures by me Params by Skarma and me Carbox by Xarc ...

Released on September 22, 2018 - A pack of 5 cars that can fly like the UFO. The 5 included hover cars are 1. Dark Shark, Fastest but hard to control at low speeds. 2. Splitter, The most balanced of them all. 3. Fusion, Fastest acceleration of them all. 4. Destroyer, Slow and steady wins the race? 5. Ghetto Bird, A late addition to...

Released on September 10, 2018 - This is the result of me teaching Rabbioli to model a car in blender. Model by Rabbioli Carbox by Xarc Everything else by me ...

Released on September 10, 2018 - A Hybrid race car, based mostly on the 1999 Honda Insight, Livery inspired by the unused race modification for the Prius in Gran Turismo 2 Carbox by Xarc Everything else by me ...

Released on September 10, 2018 - I wanted to make an Isetta, but then a thought crossed my mind 'What if it drove in le mans?'. Well this is the result. Wheel base is almost the same as the Isetta, it caused issues with params for me, but Kipy was kind enough to fix the car up. Model and Textures by me Params mostly by Kipy Carbox by...

Released on August 31, 2018 - A Boxvan suggested by TrixedXD, comes with 7 skins and very mediocre stats, but that's what you expect from a boxvan. Model and textures by me A few skins by TrixedXD Carbox by Xarc ...

Released on August 31, 2018 - A complete re-model using the base and wheels of Kiw-y-Gvalchca's Monster. It started as a simple 70's/80's coupe, but burner94 suggested I'd put a bull horn on the front and put a cow pattern on the roof. Modelling, Texturing and params by me Part of the model by Kiw-y-Gvalchca Carbox by Xarc ...

Released on August 31, 2018 - Imagine a broken RC car being repaired, but in the most odd way possible... Meet The Mangle, which is exactly that. And it will feel that way when driving it too. It steers with it's rear wheels and is power by the front wheel. Model, Textures and Params by me Carbox by Xarc ...

Released on August 31, 2018 - It's a sandrail, I don't have much else to say really, I just was thinking about the sandrail from GTA... and then I made this. It's a bit higher poly, not extreme, but somewhere between low and poly. Model, Textures and Params by me Carbox by Xarc ...

Released on July 26, 2018 - A joined effort to create some bumper cars for Re-Volt with Trixed (Most paintjobs are made by him). Model and params by me. The params were quite hard to make with the tiny wheel span of the cars, but I hope they handle decently non the less. Hopefully they're competitive against eachother. AI won't...

Released on July 20, 2018 - Finally releasing this car... it's been delayed for about a year. It used to be called X101X Angel, but the textures were awful, at least in my eyes. So after a year of being in-active I came back, did a few cars... and finally got enough motivation to re-do the UV for this car. Then I gave it some new...

Released on July 20, 2018 - One of my experimental vehicles on learning how to do params and such. This time a car with tracks. The name is based on 'Col. Moss', because why not. It's a 1930's car with tracks, really. Not much to say. Enjoy. Carbox by Xarc ...

Released on July 7, 2018 - A suggestion from TrixedXD, He asked me to make a Volkswagen T3 Utility pick-up. So I made a farmer truck because why not. It's heavy and understeery, not super special to drive, but it looks funny, right? ...

Released on July 7, 2018 - Inspired by Xarc doing beach vehicles, I made a beach buggy like thing, but threw a cockpit on it... and then it looked like a frog. So I just went with it and called it Turbo Toad. Power by a Frog V4 engine. Shadows and Carbox by Xarc Engine sound supplied by burner94 ...

Released on July 7, 2018 - It's cargo is a battery, a big one. Very precious, if it didn't have it, it wouldn't have power. Engine on the front, so it's front wheel drive. A lot of understeer, but a lot of speed too. Not good with acceleration... like at all. Carbox and Shadow by Xarc ...

Released on July 7, 2018 - Based of the Pikes Peak Cultus, meet Sokudo a nice little hillclimb car. It's probably my best work so far, at least in my opinion. Params by Skarma Carbox and Shadow by Xarc Engine sound provided by burner94 ...

Released on June 23, 2018 - Fury EX was a little project of mine to create a buggy/formula pikes peak like combination. Not much else to say except it's fast, low and sometimes a little hard to control. Detailing, car box, and testing by Xarc Model, paint job, params by me ...

Released on June 23, 2018 - The dream soccer mom minivan, but with a nice simple paintjob. It's what you expect of a minivan... it's not the best, but it keeps up with the rest. model and textures by me params and shadows by burner94 carbox by Xarc as always ...

Released on June 23, 2018 - I grabbed Big Volt and made it small... and gave it a bed cover... then painted it maroon, slapped some sponsors on there, and that's how this came to be. carbox by Xarc ...

Released on June 23, 2018 - A recreation of the hornet from Daytona USA. This model was made about a year ago. I was inactive in the community for a while so I didn't release it. Besides... it didn't have params. But after a year of waiting it's finally here thanks to burner94's help as he paramed it. model and textures by me params...

Released on June 23, 2018 - So burner94 showed me 3 wheeled Dust Mite, it was nice. But I felt something was missing. (Springs and axles) So I decided to re-do it myself. This wouldn't have been possible without Xarc though. As he did a re-map of Dust Mite called VarFlame which helped me make this possible. Dust Mite re-map by...

Released on June 9, 2018 - A Chevy Nomad inspired gasser. The parameters are a bit quirky (but fun!), to fit the nature of what gassers are normally used for, which is drag racing. It features great acceleration, decent top speed, but not so great steering. I've tried very hard to make the paintjob decent, as I normally don't...